I never thought much about keeping my tire pressure topped up, until switching to Clik. Now that I've had a _good_ experience, both presta and shrader valves feel like old tech. I can't tell you how nice it is to be able to click(!) a pump head onto the valve and not have to fuss with a pressure lever, and to know that everything will just work. I'm sold. Converted all 3 of my bikes already.
Upgraded my Presta valves with these. Higher flow and much easier to use. Highly recommend!
Excellently made valve cores, I've finally gotten from April to July without any leaking / flat tubeless tires. I've yet to loosen a valve stem from mating a pump...gone are the days of nobody else in the family able to pump tires but me. Now my 8 year old can at last chuck the bike pump, inflate her own tire, and not need Dad to help. Too bad the seal on these cores work so well the air never leaks out again so she hasn't had to pump very much unless I make a point of having her practice, haha! I've used Silca sealant and it hasn't clogged the internals of these Clik valve cores yet. Phenomenal product! I got 2x 16packs and have converted our fleet of bikes (BMX, Road, Gravel, MTB) and stand-up pumps. This is a game changer.
I have only have these a few weeks. Replacing the old presta cores with the Clik was easy. I was able to get the adapter to fit my foot pump without any problem. The valves seem to hold tire pressure reasonably well. I put sealant in my inner tubes and that also seems to cause no issues. Putting air in your tires is so much easier. Have not used the co2 adapter yet so cant comment on it. You don't have to have the Clik adapter, my lezyne co2 adapter will work but it is a bit clumsy. Thus far I'd say the Clik system is fantastic.
Great presta valve replacements. Bought these caps to replace the standard soft dust caps, but realised that they required some length of the valve stem to thread onto, i.e. they do not thread/snap onto the Clik cores themselves.
For those in a similar situation, the Quik Dust Caps are what you're after.
Easy on, tight seal, easy off. Perfect!
There are only a few products I've purchased for MTB that I rave about, adn this is one of them. Easy to use, easy to install, holds air better than any valve I've tried, and very resilient. This is the next breakthrough in valves and I imagine will become industry standard soon.
Title says it all. The valves themselves are easy to use the pump head clicks on or off with little effort and very little air loss. I also purchased the mechanical pressure gauge up to 60 psi and love it as well....makes setting accurate pressure on the mountain bike easy and no batteries with the mechanical gauge. Very pleased with form and function. Will add to other bikes in the future.
Looks great and super easy to use
The adapter is well made and fits perfectly. It comes with two adapters in the box, which is a nice bonus, as I can keep the spare for my other, smaller electric pump. Overall, I’m very pleased with the quality and value.
These are very nice, well-made valve caps and they arrive well packaged. However, they do not fit as tightly as the original plastic caps supplied with the valves, so there is a possibility that the aluminium caps could gradually vibrate loose over time—although only long-term use will confirm whether this is actually an issue.
The pack includes four caps, which is good value. A useful feature is the built-in tool for installing and removing Clik valves, which feels sturdy and well made.
I use them on all 3 of my bikes I'll never go back to Presta valve
Added this to my garage air compressor's air chuck to inflate my tires with ease!
Clik valves are straightforward to use. They make a satisfying CLIK when fully connected to a pump. No air escapes when attaching or detaching the pump. Pressure measurements are more precise and easy to read.
I got best results using threaded TPU tubes, with removable cores of course. To take full advantage, I still need to convert all my bikes and all my pumps and gauges to Clik.
It only took one experience before I became a Clik Convert. The Pro Set will outfit 8 more bikes, most of our fleet. I even grabbed a set of Schrader adapters to convert my wife's commuter e-bike to Clik. They are so good, it's hard to believe we lived with finicky Presta valves for so long.
One of my favorite TPU tubes now.
I tried them all… Tubolito, Pirelli, RideNow, Schwalbe, Vittoria, Recoloop,…
Every single one of them had some issues, be it leaking stem-tube connection, brittle plastic valve stems, non-removable valve cores, excessive pressure losses,…
With the Clik TPU tubes I haven’t had any issues yet. Sturdy valve stem, hold pressure over night with minimal losses, and overall great ride quality. My go-to tubes from now on!
They were easy to install in tubeless set up. Swapping old cores for clik cores was also simple and effective. Pumping up to desired pressure was so easy. I’m never going back.
I’m new to Clik’s, but jumped in completely. I like the convenience removing the presta inner valves and installing these in the their place. A presta inflator connector does work with these, but of course, a specific Clik connector works better. My only confusion so far has been how best to adapt my current inflators to work with the Clik valve. Clik has a lot of adapter options to choose from. So far, I’m a fan. Convenient, practical, and work well for their purpose.
I purchased black and silver Clik valve cores for my road and gravel bikes about a month ago. Love the ease of installation and ease of use.
Got one for all my pumps. fits easily into and schrader pump head. No more accidentally unscrewing the presta cores!
It’s nice when such a simple product can improve the overall biking experience.
Looking forward to the new pump heads
