Hands down by far the best inflation tools on the planet. Definite advantages over the Reserve Fillmore.They said the pump head would'nt work on the Lzeyne pump. I flipped the pump head to the schrader and the Click presta pump head threaded in nicely and works perfect. Hallelujah, now I have 2 amazing functional floor pumps that I haven't been able to use for years. I use the Click chuck with my Park Tool inflator and it works perfect. I have purchased everything Click makes and the function and quality are outstanding. Thank you Click!
First off, for $1.50 a piece they can't be beat. Reserve charges $10 a cap for anodized caps.
The issue is that they are too narrow to fit non Clik valve stems. I'm currently running third party stems with Clik cores and the tool removal section will not fit over the stem threading. This isn't a huge issue and they'll go another set of wheels, but it should be noted.
I have a floor pump with a **** on attachment. This works perfectly.
I have three of these: One permanently on the pump, one in my bike bag, and one in the garage I use for quick tire deflations
I’ve converted all 4 of our bikes to Clik valve; huge improvement and my ready to ride to ride time is reduced
This is such a simple but great improvement on both Presta and Schrader. This is a no brainer upgrade that everyone should make. I have multiple bikes and upgraded all to clik
Works great. Solves Presta’s problems Solidly built. I got an extra for me pack and put one on my floor pump.
So easy, my kids can do it.
I'm converted, these are the solution, down with presta. This is the best solution for valves I have used. I can't wait for the future where clik is the standard bikes come with.
Not having to unscrew and re close presta valves is surprisingly nice. Also, the caps of the clik valve pull straight off and push on. No unscrewing and re **** there. Putting the air chuck on and pumping is straightforward. Very happy with mine.
I've installed the Clik valve cores on 2 bikes, and it is a big improvement over Presta. Not having to unscrew the stem each time saves a bit of time and annoyance. And with Presta the stems were always getting bent or stuck. Clik avoids these issues. In addtion to the valve cores I got three of the adapters, so I could keep one on my floor pump and keep one on each mini pump that I carry with the bike. The one thing I didn't like is that I had to buy they small wrenches for the valve cores separately, I wish they had included one of these with each set of cores.
I always hated the fact that Presta valves would bend and fail so often. I didn't know that it was a problem until I learned about Clik valves. It's about time the simple valve evolved. For all the "hold-outs" step forward and try it out. You might be surprised how well these work and simple they are.
Happy to never fiddle with the **** on a presta valve again
I was able to swap these out for the Presta valves on my current tubeless valves and was able to seat tubeless tires easily. Also, they work great with a standard presta pump head.
These are so easy to install and so satisfying to use. Was pro-presta, but got tried of the hassle. I've been joking with my friend I'm going to put these on my car because of how convenient they are. Maybe I'm serious though. Should be the new standard.
Works great, just don’t over-tighten, just snug them up without turning your existing stem.
I recently purchased a few valves for my MTB. Since then, I have replaced all valves on my 3 MTB, and all of my friends are now doing the same. The gauge and pump adaptor make it very easy
I converted by eMTB to tubeless and decided to go with Clik Valves. They have been perfect, it's so quick and easy to top off before rides. Worth every penny!
I installed them on my Trek Exe trail bike with the Schwalbe Albert Gravity Tires. Click valve is so easy to use with my Cycplus air pump, snap and go.
My existing presta and schrader perssure gauges do not work on Clik valves so bought this 0-60 PSI one. It's a nice little gauge, but I wish the face was larger and easier to read. Must be held on the valve, doesn't actually click on like the pump adapter, but that's the same as my other gauges with their valve types. Nice rubber bumper feels like it could take a drop. Air release button works decently and has to be depressed after taking a reading to depressurize the gauge before storing it. Overall happy.
This product makes pumping up a tire a breeze. So simple yet so incredibly effective! I will never own a bike again without ClikValve products!
These are so easy to use! Installation just a few minutes. Makes using our small battery operated pump a snap, no **** the pump head on the valve stem risking cross threading and possibly removing the valve core while out in the woods.
great item, holds air a lot longer than the normal valve. And so easy easy & fast to pump up, will never go back to normal valves.
So much easier to top off my tires now prior to riding. No more leak issues when trying to pump up the old presta valves.
