Clik 2 - in - 1 Right Angled Pump Head & Removeable Pump Adapter (Aluminum) - Clik Valve
Clik 2 - in - 1 Right Angled Pump Head & Removeable Pump Adapter (Aluminum) - Clik Valve
Clik 2 - in - 1 Right Angled Pump Head & Removeable Pump Adapter (Aluminum) - Clik Valve
Clik 2 - in - 1 Right Angled Pump Head & Removeable Pump Adapter (Aluminum) - Clik Valve
Clik 2 - in - 1 Right Angled Pump Head & Removeable Pump Adapter (Aluminum) - Clik Valve
Clik 2 - in - 1 Right Angled Pump Head & Removeable Pump Adapter (Aluminum) - Clik Valve
Clik 2 - in - 1 Right Angled Pump Head & Removeable Pump Adapter (Aluminum) - Clik Valve
Clik 2 - in - 1 Right Angled Pump Head & Removeable Pump Adapter (Aluminum) - Clik Valve

Clik Valve

Clik 2 合 1 直角幫浦頭和可拆卸幫浦轉接器(鋁製)

銷售價格$20.00 USD
數量:

使用 Clik-Connect 二合一直角泵頭和可拆卸泵適配器(高級版 - 鋁)升級您的輪胎充氣。它專為與 Clik 閥門無縫連接而設計,具有獨特的“咔”聲,可實現安全連接。這款多功能泵頭包括一個帶有 Schrader 螺紋的可拆卸適配器,非常適合與傳統泵頭、CO2 氣瓶和迷你泵一起使用。享受輕鬆的推入/拉出操作和符合人體工學的直角設計,帶來極致的便利。

運作原理:
  • 拆卸舊幫浦頭:從幫浦軟管上旋下舊幫浦頭,然後將其拉下來。
  • 連接 Clik-Connect 幫浦頭:
  • 將 Clik 幫浦頭軟管蓋滑到幫浦軟管上。如果沒有任何間隙,則不需要墊片套圈。如果存在間隙,請將提供的兩個間隔套圈之一滑動到軟管上(選擇適合的最小的一個)。
  • 接下來將 Clk 泵頭的倒鉤端推入軟管,並將套圈和軟管蓋滑回泵頭和螺紋以固定。
  • 連接和充氣:將 Clik-Connect 泵頭推到 Clik 閥門上。聆聽獨特的「喀嚓」聲,確認連接牢固,然後輕鬆為輪胎充氣。完成後,只需拉下泵頭即可。

如何使用可拆卸轉接器:

  • 從直角 Clik 主體上旋下 Clik 轉接器
  • 對於地板上的傳統泵頭或小型泵,只需將適配器插入 Schrader 端口並關閉控制桿即可。 號
  • 對於使用 Schrader 內螺紋的泵,只需擰入適配器即可。



  • 帶可拆卸適配器的直角泵頭
  • 8mm 軟管套圈
  • 9mm 孔套圈
  • 球類及運動器材充氣機
Based on 166 reviews
93%
(154)
5%
(9)
1%
(2)
1%
(1)
0%
(0)
Very convenient

Wonderfully easy to install and use. Saves time. No more bent presta ends. It will be interesting to see how these valves hold up to sealant.

Game changer

Simple mod that makes life much easier. No move fiddling with presta valves, converting all my bikes over!

Clik stems

Work perfectly with my Topeak Joe Blow floor pump without the adapter. Easy on, perfect seal the first time, easy off. Definitely less hassle than the Prestas they replaced.

Does more than make it easy

I have converted all my family bikes to Clik, and while of course this makes topping up fast and easy, what I didn't expect was how little pressure I lose between top-ups on my tubeless setups. It turns out my old Presta valves were my primary culprit in losing pressure.

Works great with most pumps.

I am able to attach this to every single one of my bike pumps, and it works amazing. So glad I switched to click valve, because the pressed valves I had, were leaking for some reason.

Surprisingly simple

I am impressed with the simplicity and functionality of this valve system. Much better than the traditional presta valve IMO.

These are on another level

Works beautifully with my electric pump

Makes installing tubeless painless

Great gauge, holds reading so you dont have to bend down and squint to read the pressure.

What an awesome product!!

So easy to use. Click on, click off. No need to loosen then tighten the valve core. Much more durable than presta. Very happy going full click valve!!!

I like it

Good product

Excellent!

I couldn't believe how much smaller than a regular Presta/Schrader head this is. A very simple task to replace the head on both of our Specialized pumps and the pump head works exactly as advertised and expected. I've even made a Clik to Presta adapter using the Clik to Schrader adapter with a Schrader to Presta adapter screwed into it so my not-so-progressive friends can still use my pump.

No problems so far.

Working as expected. I have TPU tubes and found that they were always leaking, even with the solid aluminum stems. The Clik valves seem to have corrected that problem. I still check my pressure before rides but find much better consistency in the pressure.

Replacing the valves is easy and finger tight does seem to be adequate. I ordered the valve caps with the removal tool to replace the caps that come with them. I like knowing I can quickly swap the valve into a new tire on the road if necessary.

Perfect

I like how this gage captures the highest pressure reading so you can look at it without trying to keep it on the valve. I will admit I’ve forgotten to clear it after taking the reading and have confused myself when I checked a tire with it later.

I recommend this gage for Clik users.

I wanted the tool

I like the covers that come with the valves but really wanted to have the tool available on a ride if I needed to change a tube. I wanted to be able to quickly convert the new tube to a Clik valve.

These caps work perfectly and getting 4 in the box is great.

I had a few back and forth with Support who seemed to be the CEO about how many came in the box. I was surprised at how fast he got back to me and clarified the contents. Definitely like this company.

Perfect

I ordered extras so I could keep one in my saddlebag, car and tool bag at home.

Great product. Super easy install and use. I think I’ll continue to use it and pit it on all my bikes.

Great - easy to install and work easily

The Clik adaptor for your pump work great - click on and off easily. No muss no fuss. Highly recommend

Great system

Works perfectly. Took 15 minutes to install. Much less hassle than other systems.

Top quality

Very easy to use and of top quality.

Great adapter for Clik valves. Small and no leaks. I hate presta valves and no longer use them on my bikes.