I've installed the Clik valve cores on 2 bikes, and it is a big improvement over Presta. Not having to unscrew the stem each time saves a bit of time and annoyance. And with Presta the stems were always getting bent or stuck. Clik avoids these issues. In addtion to the valve cores I got three of the adapters, so I could keep one on my floor pump and keep one on each mini pump that I carry with the bike. The one thing I didn't like is that I had to buy they small wrenches for the valve cores separately, I wish they had included one of these with each set of cores.
I always hated the fact that Presta valves would bend and fail so often. I didn't know that it was a problem until I learned about Clik valves. It's about time the simple valve evolved. For all the "hold-outs" step forward and try it out. You might be surprised how well these work and simple they are.
Happy to never fiddle with the **** on a presta valve again
I was able to swap these out for the Presta valves on my current tubeless valves and was able to seat tubeless tires easily. Also, they work great with a standard presta pump head.
These are so easy to install and so satisfying to use. Was pro-presta, but got tried of the hassle. I've been joking with my friend I'm going to put these on my car because of how convenient they are. Maybe I'm serious though. Should be the new standard.
Works great, just don’t over-tighten, just snug them up without turning your existing stem.
I recently purchased a few valves for my MTB. Since then, I have replaced all valves on my 3 MTB, and all of my friends are now doing the same. The gauge and pump adaptor make it very easy
I converted by eMTB to tubeless and decided to go with Clik Valves. They have been perfect, it's so quick and easy to top off before rides. Worth every penny!
I installed them on my Trek Exe trail bike with the Schwalbe Albert Gravity Tires. Click valve is so easy to use with my Cycplus air pump, snap and go.
My existing presta and schrader perssure gauges do not work on Clik valves so bought this 0-60 PSI one. It's a nice little gauge, but I wish the face was larger and easier to read. Must be held on the valve, doesn't actually click on like the pump adapter, but that's the same as my other gauges with their valve types. Nice rubber bumper feels like it could take a drop. Air release button works decently and has to be depressed after taking a reading to depressurize the gauge before storing it. Overall happy.
This product makes pumping up a tire a breeze. So simple yet so incredibly effective! I will never own a bike again without ClikValve products!
These are so easy to use! Installation just a few minutes. Makes using our small battery operated pump a snap, no **** the pump head on the valve stem risking cross threading and possibly removing the valve core while out in the woods.
great item, holds air a lot longer than the normal valve. And so easy easy & fast to pump up, will never go back to normal valves.
So much easier to top off my tires now prior to riding. No more leak issues when trying to pump up the old presta valves.
Replaced 8 presta valves and all is well. Hard to believe it took this long to engineer and produce a much more efficient valve.
Replaced the head on my compressor gauge. Took me about 1 minute, cutting the hose and pushing on this new head with adapter. No need for the ferrule. Now, pumping up the 8 wheels that I have across four bikes is simply easier. I did replace all the presta valves with click valves.
I got a set of cores for my tubeless mtb setup and my latex tubes on my road bike. I like these cores better for my road bike, my pump never sealed well around the latex valve. The click is easy and faster to use, would buy again for other bikes
Freaking awesome. Initially purchased for our fleet of Brompton's given the tiny wheels airing used to be a chore, now I won't hesitate to top up before the commute. The experience has been so transformative I ended up getting a bunch more and converting the rest of the fleet over. Hoping they last a long while the only cons I have now are price and the current state as a rare standard.
Makes inflation a pleasant experience.
No complaints with the caps, it's nice that they work as a core removal tool. However, I find myself preferring the "click-on" caps included with the valves: these just press on and pull off, no **** required.
