I hate Presta valves. I found clik valves when looking at other people complain about Presta. Even though the cores are expensive I decided to try them and have been using them for 3 months. I bought 4 and used them on 2 bikes. For the most part they have been awesome. I use it with a portable electric pump. The process of topping off my MTN bike tires takes less than 30 seconds per tire and is super easy.
My one complaint. On race day I went to top off tires and one of the valves stuck open. It took a few minutes messing with the valve before I finally got it to seal again. I am guessing sealant was preventing the valve from closing. Assuming they can solve that issue I would have no reservation recommending them.
This pressure gauge is smaller than many other popular gauges, is dead easy to use, & gives quick, accurate results. It's small enough to stick into your bike bag & take with you anywhere. It's essential to get one after converting your bikes to Clik!
Works great with my electric car pump. Nice firm leak free connections.
They work fine but I didn’t realize that they were also included with the valve. I guessed i have spares now.
Very easy to use, works great and keeps the last reading, which makes it very easy to use.
I really like it
I have converted all my bikes to clik valves, I love them.
Great accessory for an already awesome product. This makes filling up tires in the shop quick and easy by having the adapter always accessible.
This Digital Gauge is perfectly paired with Clik Valves. It's small, stylish, accurate, and it doesn't feel cheaply made.
This thing is built like a mini tank. It works as advertised and I’d buy it again in a heartbeat.
Excellent price and super quality. Accuracy is excellent.
Wish all non digital gauges were of this quality
Clicks on easily without pressure loss.
Clik products have made life easier for my ever deflating tubeless wheels. Yes, they should be sealed better but you know how it goes. At least now inflating is much more enjoyable.
Switched over both bikes to clik valves and love how well and easy they work! No spray or clogging when inflating.
I have now totally switched to the CLIK system for all my bikes, its awesomely easy to use and a total game changer for me!
You can't beat a purpose built Clik gauge. Quicker and easier than clamping a pump to check pressure.
Love these things, one of the best simple upgrades you can do for your bike.
Small, good build quality.
I do not like that there is no air bleed button, you have to unscrew header a little to bleed. Button would be quicker, but probably will make construction bigger.
Power button is protruding and to easy to click accidently, for example if your tools are packed too tight.
Removable head is very similar to pump adapter, same Shrader thread but shorter, and because of that it may not seal with your pump if you decide to use it as pump adapter. It would be great improvement if head was the same part as pump adapter. It would mean that you always have it with you and don't need a separate one.
A very well made product. Very easy to use, makes setting the tier pressure accurate and a quick job.
...Out of all the quick connect air fittings out there...Clik Valve is one of them!
These caps protect your Clik valves from dirt while looking sharp. They feel noticeably sturdier and more precise than the typical Presta-based caps, making your valves feel secure and your setup cleaner.
Durable, easy to use, and just the right size, they’re a solid upgrade.
I’ve replaced all the valves on my ten bikes with Clik Valves, and they’ve been fantastic. They’re effortless to engage and pump—no more fiddling with unscrewing presta cores. On my mountain bikes (~20 psi), there’s zero air loss when detaching, and on my road setup (70 psi), I only see about 0.5 psi loss at most.
They drop right in as replacements, the adapter works perfectly with my pressure gauge, and even my Ryobi inflator connects securely with the pump head. Pump head is small enough to work with my disc wheel on my TT bike.
My only nitpicks: the standard caps are plain, and the aluminum ones have been out of stock for a while. They’re also longer than I’d like, so I designed and 3D-printed my own TPU caps to match my bikes. Venting air is slightly trickier—you’ll need a gauge with a release button or something to press the valve core manually.
Overall, an excellent upgrade that makes pumping faster, cleaner, and more consistent.
NOTE: The product listing says that this is a "Premium Threaded Dust Cap Set" with a "Threaded Connection To Valve," but it is definitely possible to miss that this cap is meant to thread onto a Presta valve with threads. This cap cannot thread or snap onto the Clik valve core itself. If your Presta valve or valve extender is not threaded, this cap will not work. If this cap works for you, it works very well, providing secure coverage and protection for your Clik valve core, and the integrated core removal tool is a nice bonus.
