Unless you need to air down your tires on the trail all the time, there’s zero downsides to these. They fix every single problem with traditional presta valves. The new valves are very high quality, as well as all the other components in the kit. I’ll be running this on all my future bikes.
Been using for a few weeks now, definitely like them, faster than old presta, easy to work with
The gauge functions well, providing a quick readout. Gauge must be pressed on during use and will not "click" into place. However, the bleed function does not work well - the pressure readout does not update while bleeding, instead holding the highest value initially measured, despite the decreasing pressure. Pressure readout must be manually updated after each bleed action by re-pressing the "on/off" button. A better design would be a "tune" mode, where the displayed value is continuously updated. For this reason I would recommend the manual/analog gauge instead, and I wish I had bought that instead.
Additionally, the supplied battery was dead within a week of use.
Work just as promised and can’t expect ever going back to presta.
Love 'em! No stems to unscrew. No pump levers to throw. Just pop the pump on and off that simple. Air goes in easy with minimal loss removing the pump head.
Luv em. Easy install, easy inflation w/ adapter or standard presta head. Hold air significantly longer than presta.
These little devices make airing up my tires stress free! They were super easy to install (just unscrew the old Presta valve and **** these in) and then all I had to do was attach the awesome little pump adapter to my floor pump and then “clik” I’m airing up my tires with no problems!! I’m going to change all my bikes over to these amazing little gadgets. I highly recommend them to anyone who is tired of dealing with all the issues you can run into with your standard Presta valves.
Works great, and no more leaky Presta valves!
I've bought 4 pairs of Clik valve cores and two of the shrader to Clik adaptors. Three bikes converted so far. It is so much quicker and easier to just grab the pump, click it on the valve, and pump it up. No messing with caps and the little nut. No leaking of the head on the stem, no loss of pressure when removing it from the wheel. Just easy and accurate.
These are the products you didn’t know you needed. While you can get by without them technically, you will not regret switching your sometime annoying Presta valves over to these valves. The set up is super easy especially for tubes and converting my pump was a breeze. I also purchased the pressure gauge due to some saying there may be some discrepancies in pressure on this system but I found my native gauge on my tire pump was spot on with the gauge purchased from Clik. But you misled may vary.
As soon as I heard about these (shout out to Berm Peak on YouTube) I immediately bought a set for myself and partner .... So much easier than dealing with presta. Maybe you could look into Schrader valve conversions also
Work well! I hope Clik becomes the standard cycling valve!
The click valves are so simple to install and use, no more bending presta stems or busting finger nails trying to flip a lever on schrader valves between spokes. These made airing up easier for my fat fingers and even better how my kids can do it without needing my help.
prestas just suck, unless bike brands go back to Schroeder, I'll be buying these
Really impressed with the Clik Valves so far, super easy to install and just better in every way than Presta
Only issue I’ve run into is some presta tubes do not have removable cores so they have to be changed to use these.
Love it, and it *immediately* made me impatient with traditional pump heads. Works great--I just added it into my regular two-way floor pump (in the Schrader section).
Nice idea with the built in "wrench" opening. But the aluminum is very thin, and if you use the cap to tighten the valve just a bit too tight, the cap gets gouged and won't work to tighten/loosen the valve anymore. I find the caps fit a bit loose and rattle annoyingly. I have gone back to the rubber caps that come with the valves.
Fantastic valve system that works every time easily without the fuss of the presta system. Easy to click on and off and accurate.
They were not lying of how much time you save from just not having to manually **** in a presta valve alone. Minimal air loss after inflating and satisfying click when engaged. Not sure how it resist sealant clogging yet. Not a fan of all the conversions to my pumps but I truly think these will be standard eventually in the industry!
So happy I tried these. Easy install. Secure air. And a much better inflation experience than presta.
The first click valve i installed leaked right through the valve. I replaced it with another one and no issues since, I love how easy it is to fill with air once i got the adapter head. So far I like it pretty well. Definitely better than presta . I hate trying to get something either clamped on or screwed on the presta. Click definitely solved that. We will see how long they last. So far so good
There really isn't much to say about the Clik system itself. It's just the way this always should have been. It clicks on, my pump gets a read on the current pressure, I inflate the tire if I need to, click it off, done. No accidentally letting out air, no mysterious lack of a reading on the front tire. No worrying about bending or breaking something. No problems. I need to get more valves so I never have to take the adapter off my pump.
Incredible product. Works so well. Everyone should replace their pv with these
