外螺紋 Schrader 至外螺紋 Clik 閥門適配器套件
Schrader to Clik Valve Adapter Set - Clik Valve

Clik Valve

外螺紋 Schrader 至外螺紋 Clik 閥門適配器套件

銷售價格$9.00 USD
數量:

隆重介紹 Clik 閥門 Schrader 轉接器,這是將所有笨重的老式 Schrader 閥門轉換為屢獲殊榮的快速連接 Clik 閥門的終極解決方案。升級您的自行車、踏板車和電動玩具的全部庫存,再也不會因通貨膨脹而感到沮喪。此轉接器設計用於無縫擰入 Schrader 外螺紋,提供安全且氣密的連接。 號

*請務必選擇 Clik-Connect 泵頭轉換套件,以獲得最佳效能。

  • 一組兩個 Clik 閥門適配器,外螺紋 Schrader 至外螺紋 Clik 閥門,一體式設計(外螺紋適配器)。鍍鎳黃銅
Based on 235 reviews
89%
(210)
6%
(14)
1%
(2)
1%
(2)
3%
(7)
Miracle click

The click I saved my arthritic fingers and hands and wrist. This couldn’t have come along at a better time love it love it love it.

Simple Replacement

I was a bit concerned that this new head would work on my pump but I should not have been. Easy replacement and works great.

Go All In

I was going to buy a pair of the Clik valves to make sure I liked them before buying more for all my bikes. But a good buddy had already installed on his bikes and raved about them. So I jumped in the deep end - buying valves for all my bikes and adapters and new pump head. So glad I did. These are absolutely awesome. Thanks for the 100+ years Presta but time to move on from my horse and buggy.

A worthwhile purchase !!! 👍

Love the ease of use. We'll never go back to presta valves. I was able to see a stubborn tire with the adapter and my regular pump. Makes keeping seven bikes in the garage easy instead of a chore.

so far so good

works very well so far.

Best Alt to Presta

Great design. The fragile Presta tips have always been a struggle for me. I'm completely converted to Clik!

Great system. I’m sold!

I have been using Presta valves since the mid 1980’s and have never had any real issues with them. I decided to give Clik Valve a try on four of my favorite bikes and I can honestly say that it is a worthy upgrade, the ease of a pre-ride top off is incredible and the increase in air volume is noticeable. I purchased three presta conversion valves, an analog gauge, the replacement pump head assembly and a Schrader valve converter. I am very impressed with quality of all the components and I plan on buying more valves to upgrade the rest of my bikes. I hope these cores will be an option when buying new inner tubes in near future. Well done.

So Good

This has been the best and simplest upgrade. I love the simplicity and that I have zero air loss in my tires since installing.

Future perfect

Retired bike mechanic, just adding great new innovations to my collection, have to be prepared, hopefully your idea will be a great success.
Best wishes

The Future Is Here

I’ve tried a lot of the new valves. This is my favorite. Simple to remove cap, simple to put on pump, fats flowing. The new standard for me.

Removing the cap

Some times the caps don’t want to come off.

Good Most of the Time

Bought several adapters after the first one to use with my CO2 inflators and one to replace the initial one on my floor pump. Most seal well, but some leak air more than others. Leak rate goes from no leak to slight leak depending on the adapter.

Clik valve is the best

Works great

So much nicer than presta

Beautifully Machined & Simple Retrofit

This pump head is the heart of the Clik Valve system, and honestly, for $20 they knocked it out of the park. The fit and finish of the machining is perfect, and the styling is simple and sleek so it complements your existing pump beautifully. Retrofitting my old Bontrager took less than 5 minutes and didn't require any tools or even cutting the hose. The extremely compact head fits easily in between spokes, and the Clik system makes inflation virtually foolproof.

As minor criticisms, I'll note that my pump head did not come with the listed "ball and sports equipment inflators", and though there are some included 8/9mm hose ferrules, the 10mm hose on my pump felt a little sloppy until I 3D-printed a custom one. Might as well include the 10mm so everyone can get the same premium experience no matter what pump they're converting.

Works well

The adapter works well. No complaints, I'll have to by the replacement head on my next order.

Fast and Easy

Installation is a snap, the pump head adapter makes a great complement to a cheap hand held compressor. Recommended

So much better

These are so much better than presta valves, easy to use and look better!

I hate Presta Valves

Very easy to use. Make sure you order inner tunes with replaceable cores.

Good valve, not without issues

I like not having to deal with the little knurled nut on top of a Presta valve, and will probably appreciate it more so this winter on a fat bike. The main problem is with the cap design and how they sell the valve cap. Your current ones won't work with this design and you have to buy Clik's separately. The plastic ones that come with the valve core are very easy to lose and none of it looks good if you have existing colored valve stems. Fortunately, Wolftooth is offering some Clik products and may be backwards compatible in terms of the valve cap.

Best valves you can buy!

These are absolutely amazing, no more unscrewing the little valve, no more futzing around with the lever on a pump, just pop it on pump and pop it off! Saves time and frustration, and worry that you're going to bend your valve! (Skip the premium dust caps though, they don't live up to the "premium" label)

the perfect solution

presta valves solved a problem with super narrow rims, a problem we no longer have. schrader valves are fine but with an industry designed around the presta size that's not a great option either. additionally with both presta and schrader the potential to leak air with fiddly pump heads is all too frustrating and common. clik fixes all these problems!!

Best new thing for MTB

I've been super impressed how such a small item has changed my riding experience! I don't think I'll ever switch back to presta valves.

Great Gauge

Super easy to use. Perfect for gravel pressures.